Cold In-Place Recycling

 

 The following video shows and explains the CIR process:

 

The Video below shows a Coughlin Company Cold In Place Recycle job done near Gunnison, CO

 In 2015 Coughlin Company Complete the first CIR Project for Arapahoe County Colorado. Follow this link to Learn more. 

 

 

Partial depth Cold In-Place Recycling is a major innovation to improve roadways and at the same time reduce the use of new materials and transportion costs.

CIR is based on the principle that the in-place bituminous pavement is a sourse of materials that may be used to build a new bituminous layer.  The Process is carried out on site and reuses the existing material to a depth between 2 and 5 inches.  The existing pavement is milled, reclaimed, transformed into aggregate, which is then mixed with emulsion, layed down, and compacted to the specified density.  After a specified curing period the recycled material is surfaced with a wearing course.  CIR is a very effective, efficient process and should be considered on roadways that may be cracking and/or deforming.   Based on the life cycle cost of pavement rehabilitaion, Municipalities have reported that the annual cost of CIR projects may be as low as 80% of a traditional method.   Another benefit of Cold in Place Recycle is the possibility of a shorter construction period.  This is due to the high production rate of Coughlin Co. modern machinery.  There are a variety of stabilzing agents.  Let Coughlin Company help you make the best decision on which to use on your project. There is no doubt that the rapid growth of CIR throughout the world is evidence of the cost-effectiveness and technology of this process.

For more information on Benefits of Cold In-Place Recycling click here.

Click Here To download Cold In-Place Recycling Brochure

Cold In-Place Recyling Photo Gallery

 

Coughlin Co. was recently featured in Asphalt Contractors Magazine

CHECK IT OUT

Click here to read the article